Here's a tip for those of us with a cush drive

Now I know that the more experienced amongst us would already know this and I'm pretty sure now that I was shown this back in 2010 at a Horizons Unlimited meeting but had forgotten about it.

If you are removing, working on, or re-inatlling a rear wheel with a cush drive, remember that the sprocket carrier comes away from the hub fairly easily. To avoid this being a problem, either wire or cable tie the sprocket to sokes on the wheel. Life will be some much easier. Trust me, another lesson learnt from making mistakes.

If you don't know what a cush drive is, here is the Wikipedia article on cush drives.  Here is a photo from a postie bike as I did not think to take photos of my hub. It is quite similar to the Suzuki one though.