Hello from Huntsville, Alabama

Some photos from a great day in Alabama

Tools, and the use thereof ...

For those of you in the know, you will be aware that Karen and I are in the USA on holidays. We spent today in Huntsville, Alabama and tomorrow we will be off to the US Space and Rocket Center.

What has this got to do with tools? Nothing really. But on the way here I did find a 1/4 inch drive torque wrench for USD28.00.  Try even finding one in Queensland, yet alone for a real cost of about AUD35.00. Yesterday we also found a spark tester for USD8.00. Another tool that I struggled to find at home. Having one allows me to test output from the ignition coils on a motorcycle without risking damage to the CDI unit, which is usually very expensive to replace.

Anyhow, about using a torque wrench properly. Some home mechanics will say do not use one and have several stories of broken bolts and stripped threads. What they do not know and what I have learnt over the last year, is to use a torque wrench and to use it properly:

1. Check to see if the bolts are 'stretch bolts'. These are softer metal bolts that do actually stretch and should be replaced.

2. Clean the threads on the bolt and in the hole. You can use a wire brush, brake cleaner, a tap-and-die set or even some stainless steel bolts with a slit cut along the thread. This provides a cutting edge as well as a path for the debris to travel along and out on.

3. Check the motorcycle manual on the correct procedure. Does the bolt go in dry, with a specific grease or a threadlocker.

4. Finally, check the torque wrench instructions. Some require you to torque in steps, some require you to first lubricate the innards by torquing in a vise.

If you follow the correct procedures, broken bolts and stripped threads should become a thing of the past. In my case, at least, I hope it is.

The DR800 is going, registered and insured ...

Very minor oil leak on the gearshift cover gasket. This gives me a chance to try out Permatex "The Right Stuff" instant gasket maker in lieu of the standard Suzuki gasket. This bike will be my daily driver for some time to come now.






November 2014, more repairs on the DR800

The work on the Suzuki DR800 continues. Now that the ignition and electrical issues are fully resolved, a range of little things require attention. Being an old bike and also following my philosophy of using parts that are readily available from a range of sources sometimes means being creative. Here are a few examples:

First, the exhaust pipe. It has rattled around a bit since putting on the Laser Produro exhaust and whilst degreasing the swingarm, it became evident that the occassional clunk that I just ignored previously was the exhaust hitting the rear spring. That's no good! I hunted around for a suitable bracket but none could easily be found. Evenutally I bought a bracket for a 40 mm PVC pipe and used some scrap steel from a filing cabinet. Total cost was about $5.00 and that includes two brackets. This is the result at the moment:

It works very well. The second bracket I have round the edges on using the bench grinder and painted. Once the painting is finished I will replace the brackets and the job will look neat. Probably paint the washers, nuts and bolts as well.

The next issue is the various rubber grommets that hold side covers and plastic bash plate on. I did not want grommets that were specific to the bike, nor the associated cost. Nothing 100% suitable was in my grommet kit and so a drive out to Masters Home Improvements was in order. I had previously checked Bunnings but their selection did not have anything quite right. Masters has these grommets and washers and they did the job nicely. To put the grommets in I used a smear of rubber grease which I wiped off when finished. The rubber is quite dense and I hope that they will work quite well. I also replaced the standard bolts with 6 mm bolts with wingnut tips. This will make removing the bash plate easier for cleaning, especially when travelling off-road.


To finish off this blog, a few workshop tips.

Use a punch to place a mark on the top of the magnetic parts tray. When I pull bolts out of a side cover for example, I can then place them in order, the first one starting at the mark and moving around the tray in sequence. Makes putting things back in order much easier.

Take the time to thoroughly clean the holes and the bolt threads. To clean the holes you can either use a tap and die set or make a specific tap. As the Suzuki only uses a handful of different sized bolts, I make custom taps using stainless steel bolts. Using a rotary tool such as a Dremel or a hacksaw cut an oblique gash along the threads. This creates a sharp edge to cut into any built up grease, much or threadlocker as well as a path for it to come out of the hole. Here is a Youtube video that explains it better. Whilst I have a tap and die set in the workshop, I can take the three DIY taps on the bike for trail use.

Clean the bolts. You can use some degreaser, a die and/or move a nut up an down. I found that a suitable wire wheel mounted in my drill press an excellent method. Of course you should pay attention to the usual safety things such as glasses, gloves etc.


One final tip is to put all the bolts back in and just tighten a few threads. If you have everything right, the bolt heads should all be an equal distance from the cover.

I really only started doing the above tips in the last month and found them to really make life much easier. Tightening by hand is much easier and torquing to the correct specification much more exacting as well. The cleaned bolts look nicer too.


Back in time ... The Great Australian Ride Send Off - 9 August 2014

Now that university has finished for the year and the Horizons Unlimited Queensland 2014 meeting is over, I have decided to break free from 'the subtle tyrant of time' and go back and finish some photos, videos and commetaries from earlier this year. Thus, there will be a few posts over the next month that will refer to events and rides out of chronological order.

The first one of these is the Great Australian Ride 'Send-off'. Each year a group of riders led by the charismatic Stuart Ball, head off from Byron Bay and cross Australia, through the centre, to Steep Point in Western Australia. For those of us who are not yet ready to tackle such a challenge, we can do certain legs of the journey and this year I joined the send-off from Byron Bay to Tenterfield. It was a great day, a real carnival atmosphere and countless bikes left Cape Byron lighthouse together. The entire event is desinged to be a great adventure and raises funds for the Sids and Kids Foundation in Brisbane. Here is the video of my early morning ride from the caravan park to the lighthouse. If you listen closely you can hear that the bike needs a service and some nuts and bolts need re-tensioning.


I'll be doing another video of the ride from the lighthouse to Tenterfield and trying something different, an audio commetary. Not sure what I will say, I need to think that one through.

Until the next post, ride it like you stole it.

Saturday 11 Oct 2014. Repairing the DR800.

The DR800 is coming together slowly. Spent a few hours today putting it back together. Today was about putting the oil cooler back in after straightening the fins and a repaint using Taubmans White Knight Engine Enamel. Straightening the fins will allow air to flow through the radiator and cool better. A good black paint job using a thin film of paint that is designed for the higher temparatures will allow better heat transfer to the air flowing through the fins. Its important to keep the oil in its best operating temparature on all machines but a more difficult task on air/oil cooled machines as they have no supplementary cooling water/liquid cooling systems to help.

I also spent a few hours on the wiring loom, no pictures as yet as I realise that the last hour was spent soldering several wirings on the wrong side of the frame. In some ways a good things as I get more chance to practice the soldering and its great to know that I can now stop, check, recognize a mistake and fix it before doing something silly like setting the bike on fire.

These two pictures are the oil cooler before repair.


 The last two are the cooler after repair. Its not perfect but much better. Replacements are not available but the late model Suzuki DR650 oil cooler is similar and should fit if ever needed. Another popular ghetto modification is adding a small 12 volt fan connected to either a manual switch or a thermostate switch set to somewhere between 85 and 95 degress centigrade. Something to think for the future.



Friday 3 October to Sunday 5 October 2014. Horizons Unlimited Beaudesert 2015

I've had the photos up for a few days but have held off putting the text up. Its now been a week and some time to reflect. By all reports and many emails, facebook messages and personal chats it was a success and we have touched a few lives. Although Horizons Unlimited is ostensibly all about motorcycle travel, the fact is that its is about taking stock of where you are at and thinking about what you are doing in life. Dualsport riding and adventure travel provides an opportunity to forget about the mortgage, put aside the worries of work and focus on the moment. At the end of the ride you ofte get the chance to enjoy the view and reflect on God's creation and your place in it.

Here is a photo of Mal MacConnell's custom adventure-spec Suzuki DRZ400. A beautifully prepared bike. Look out for Mal's new business called Adventure Bike Australia. I expect it to do very well.

Stuart Ball's KTM990 Adventure. What a beast. Stuart runs the Great Australian Ride, which is a crossing from Byron Bay to Steep Point across the middle of Australia. All funds raised go to the Sids and Kids charity and in 2014 the cheque handed over was for just over $68,000.00.



Lachlan Campbell's display of his custom made hard panniers and top boxes sold as MTD Luggage. Lachlan has been a long time supporter of Horizons Unlimited and the quality of his work is fantastic.


Brian and Shirley Hardy-Rix have travelled all over the world on large BMW bikes. They have released two books, "Two for the Road" and "Circle to Circle'. In the first book, Shirley begins by re-counting how the cancer of her sister encouraged them to re-evaluate their lives.



Chris, what a legend. Will be heading off on his second "Big Lap" of Australia in Ausgust 2015. Chris has been on several ride days with Horizons and nothing stops him. What a legend.


A view of the campsite. Plenty of powered sites, space for plenty more in 2015.






Rachel and Skip came down from Cairns to help out and run the raffle for Aussie Helpers and did a great job. Well done guys and thanks.





Slow bike race. Apparently the ability to balance whilst going slow is a good thing to master. Slow?


On Friday night I gave a quick presentation on Timor. Due to lack of preparation, I forgot half of what I wanted to say. The bottom line is that Timor Adventures provides the opportunity to have a real adventure in a short space of time. One that is really worthwhile and I recommend to anyone. For me it is not a question of if but when, I will be back.